How To Use An Essential Oil Diffuser
#1. Choose Location
-Pick an open area in a room or office with a solid surface or tabletop. You will need a outlet to plug it in. Also, since water is being used, it is good to have a placemat or towel down if you are using on a wood surface.
-I have a diffuser on my nightstand near my bed and one in my family room on a solid shelf. For best use, avoid placing in direct sunlight or near a fan.
#2. Add Water
-Once you have your place picked out. Fill your diffuser to the fill line of the water reservoir with clean tap water that is room temperature.
-Most diffusers have a fill line on the inside of the water reservoir or a measuring cup to fill up and then add to reservoir, refer to your diffuser manual for recommended water amount your diffuser requires.
*DO NOT OVERFILL or your diffuser may not run properly.
#3. Add Oils
-Next, add 3-10 drops of essential oils to water. You can use a single essential oil like lavender, or an essential oil blend. See below for recommend oils to diffuse.
-Usually 6 drops is enough but sometimes you may want more oil for a stronger scent. You can experiment with the essential oil amounts to see what you prefer.
#4. Turn On
-Place cap or top of diffuser back on as your diffuser requires. Turn on. Set which features you would like if your model has options.
-Here are two of my personal favorite ultrasonic diffusers available on Amazon at affordable prices:
Not all diffusers are the same, some have options depending on the model you purchase. You may be able to set the length of time you want the diffuser on, or different time cycles you can choose from like on for 30 seconds then off for 15 seconds.
Some also have light options you can turn on for a display of colors or a solid color. These features vary widely depending on brand and model.